Canon Printer wireless setup for MAC

Using the Apple Software update, you can achieve the Canon Printer wireless Setup for MAC by installing the Mac Snow Pixma print driver.

• Since some of the newer models of Canon Printers do not support this operating system any longer, it is significant that you make sure that you have a compatible driver for your Mac OS X 10.6.
• Just connect the printer or scanner device to the Mac and wait for a while
• Usually, the required update is detected by the OS X to be downloaded and installed automatically

Connecting your Canon Printer

• Whether you are by the wired or wireless network, an lively internet connection is an imperative necessity for the Apple Software to install and update the appropriate Canon Printer Setup driver
• Make sure that your Mac is connected to the internet
• Now, depending on your link type, you can do any of the following.

Note: Add the printer to the Mac computer’s printers’ list while you see a prompt during driver installation
Computer with USB cable connection

• Get a USB cable and attach the computer and the Canon printer Setup through the individual USB slots. Here, the software update procedure runs mechanically.
• Attach your PC or laptop to an internet network connection and turn the printer on
• Attach the USB port wires to both the hardware
• At the software Update window, you will see a few messages displayed that will tell you to install the driver
• Follow those commands and add the printer to the list of connections

Wi-Fi connectivity      

• The Apple software always identifies the appropriate software and driver and even attempts to install it on your device the moment you attach your printer to a wireless connection.
• For the Canon printer Setup that has either a text or touch steering control panel, can use the Wireless Setup Wizard to configure the wireless connectivity. Basic control panels have no screen but only buttons. In such a printer, with the assist of WPS or Wi-Fi Protected Setup should be able to achieve connectivity.

The wizard         

• The Wireless Setup Wizard is obtainable when you press the ‘Wireless’ button; thereafter you just have to discover the Wireless, Network or Setup tabs
• Select your network with the help of guided commands that will prompt you to enter some ID and password to connect to the network
• That is why it is significant to collect your SSID information and security passwords before you start using the wizard
• Next, turn all connectivity devices such as the router, printer and computer on and put them on the same network
• To connect the printer with a network, you have to scroll during the control panel and go to the Wireless Setup Wizard to follow any instructions

WPS

• The WPS or Wi-Fi- secluded setup can be done when you have a printer with drive buttons
• Check your printer physical to see if you can find a support system
• Till the wireless light starts irregular, you must hold the wireless button down
• Then go to your router after a few minutes and press the WPS button
• Mechanically, a connection with the printer is recognized

If you have any issues in following the advice that we have mentioned herein for Canon Printer wireless setup for MAC, feel free to visit www.canon.com/ijsetup any point in time. We will lend our support 24/7 and help our customers resolve their issues in no time. Otherwise, use the chat ability on our website canon ij com setup to get in touch with us and resolve your printer related queries.

Source